
4000 ml
MG Red Shift 0W-20 – a fully synthetic engine oil with an advanced additive package, developed for modern petrol, diesel and hybrid engines. API SP, ACEA C5, ILSAC GF-6A – fully compatible with DPF/GPF filters and three-way catalytic converters, with LSPI protection. Approved performance level for Mercedes-Benz, GM dexos1™ Gen 2, Jaguar Land Rover, Ford, Volvo and Chrysler. 4-litre pack.
MG Red Shift 0W-20 4L (SP C5 GF-6A Super Combo) is a fully synthetic engine oil that combines carefully selected base oils with a latest-generation additive package. On the engine's moving parts, the additives create a durable protective barrier that gives the engine effective, long-lasting protection from the very first seconds after starting.
Documents
Safety data sheet PDF · Download ↓MG Red Shift 0W-20 4L (SP C5 GF-6A Super Combo) is a fully synthetic engine oil that combines carefully selected base oils with a latest-generation additive package. On the engine's moving parts, the additives create a durable protective barrier that gives the engine effective, long-lasting protection from the very first seconds after starting.
The SAE 0W-20 viscosity grade is designed for low-friction operation: on a cold morning the oil reaches the key components almost immediately, and in a warm engine it reduces internal drag. The oil meets the API SP, ACEA C5 and ILSAC GF-6A standards, so it is compatible with modern emission-control systems (DPF/GPF, TWC) and with the demands of today's downsized, turbocharged and hybrid powertrains.
Unlike ordinary engine oils, MG Red Shift 0W-20 4L is formulated with an integrated additive package that goes beyond basic lubrication. The active components bond to metal surfaces and create a protective layer that stays effective even over extended oil-change intervals. That means less metal-to-metal contact, lower operating temperatures and quieter engine running – benefits that become more noticeable with every oil change.
A 0W-20 oil has to do two jobs that pull in opposite directions: flow lightly enough to save fuel while still holding a protective film under load. It is the additive chemistry that bridges that gap, which is why this viscosity grade depends far more on the quality of the formulation than thicker oils do.
Product type: Fully synthetic engine oil
SAE viscosity: 0W-20
API: SP
ACEA: C5
ILSAC: GF-6A
Volume: 4 litres
Engine type: Petrol, diesel and hybrid (including turbocharged)
Emission system compatibility: DPF, FAP, GPF, TWC
Storage: Keep in a cool, dry place, protected from direct sunlight
Shelf life: 5 years from the date of manufacture if the pack is unopened
Kinematic viscosity at 100 °C: 8.5 mm²/s
Viscosity index: 156
Total base number (TBN): 8.5 mg KOH/g
Pour point: −45 °C
Flash point: 210 °C
CCS viscosity at −35 °C: 5900 mPa·s
Appearance: Clear, red
MG Red Shift 0W-20 4L meets or exceeds the following manufacturer specifications:
Mercedes-Benz: MB 229.71
GM: dexos1™ Gen 2
Jaguar Land Rover: STJLR 51.5122
Ford: WSS-M2C947-A
Volvo: VCC RBS0-2AE
Chrysler: MS 6395
Toyota, Nissan, Suzuki: 0W-20 service fill requirements
MG Red Shift 0W-20 4L is suitable for petrol, diesel and hybrid engines in passenger cars and light commercial vehicles, including engines with:
direct injection (TSI, TFSI, GDI, D-4S, HDI, TDI)
a turbocharger
Start-Stop systems and full or mild hybrid drives
DPF / FAP / GPF particulate filters
three-way catalytic converters
Important: use this oil only in engines for which the manufacturer specifies the 0W-20 grade. If the service book calls for a thicker oil, such as 5W-30 or 5W-40, choose the matching product from the MG Red Shift range.
The 4-litre pack is the most popular choice for ordinary passenger-car engines with an oil capacity of 3.5 to 4.5 litres. MG Red Shift 0W-20 is also available in a 1-litre pack for topping up.
The MG Red Shift range rests on the three pillars shown on the label: Protection, Lubrication, Performance. This 0W-20 adds a fourth dimension – efficiency – for drivers of modern engines whose manufacturers have moved to a low-viscosity service fill to meet emission targets.
With approvals reaching from Mercedes-Benz, GM and Jaguar Land Rover to Ford, Volvo and Chrysler, and with the requirements of leading Japanese manufacturers met as well, a single product covers a wide range of newer vehicles in a mixed household or workshop. Its distinctive clear red colour also makes the oil easy to recognise on the dipstick and at every top-up.

MG Red Shift ENGINE – an advanced formula that protects, reduces friction and extends engine life. For petrol and diesel engines, with pure anti-corrosion protection and no ceramic or Teflon additives. RESTRICTION !!! The additive is NOT SUITABLE for TOYOTA 0W-30 3WZ - 4WZ engine oil

MG Red Shift ENGINE – an advanced formula that protects, reduces friction and extends engine life. For petrol and diesel engines, with pure anti-corrosion protection and no ceramic or Teflon additives. RESTRICTION !!! The additive is NOT SUITABLE for TOYOTA 0W-30 3WZ - 4WZ engine oil

MG Red Shift ENGINE – an advanced formula that protects, reduces friction and extends engine life. For petrol and diesel engines, with pure anti-corrosion protection and no ceramic or Teflon additives. RESTRICTION !!! The additive is NOT SUITABLE for TOYOTA 0W-30 3WZ - 4WZ engine oil