MG Red Shift
MG Red Shift 0W-20 1L

1000 ml

MG Red Shift 0W-20 1L

€34,90Currently out of stock

MG Red Shift 0W-20 is a fully synthetic engine oil with an advanced additive package, developed for modern petrol, diesel and hybrid engines. API SP, ACEA C5, ILSAC GF-6A – fully compatible with DPF/GPF filters and three-way catalytic converters, with LSPI protection. Approved performance level for Mercedes-Benz, GM dexos1™ Gen 2, Jaguar Land Rover, Ford, Volvo and Chrysler. Handy 1-litre pack – ideal for topping up between oil changes.

MG Red Shift 0W-20 1L (SP C5 GF-6A Super Combo) is a fully synthetic engine oil that combines carefully selected base oils with a latest-generation additive package. On the engine's moving parts, the additives create a durable protective barrier that gives the engine effective, long-lasting protection from the very first seconds after starting.

01

Fuel-efficient 0W-20 engine oil – handy 1-litre pack

MG Red Shift 0W-20 1L (SP C5 GF-6A Super Combo) is a fully synthetic engine oil that combines carefully selected base oils with a latest-generation additive package. On the engine's moving parts, the additives create a durable protective barrier that gives the engine effective, long-lasting protection from the very first seconds after starting.

The SAE 0W-20 viscosity grade is designed for low-friction operation: on a cold morning the oil reaches the key components almost immediately, and in a warm engine it reduces internal drag. The oil meets the API SP, ACEA C5 and ILSAC GF-6A standards, so it is compatible with modern emission-control systems (DPF/GPF, TWC) and with the demands of today's downsized, turbocharged and hybrid powertrains.

02

Key benefits

  • LSPI protection
    the API SP / GF-6A formulation protects against low-speed pre-ignition, a damaging phenomenon in modern turbocharged direct-injection petrol engines
  • Lower fuel consumption
    the low-viscosity formulation reduces internal friction and pumping losses, cutting fuel use and CO₂ emissions
  • Designed for hybrids
    hybrid powertrains restart the engine constantly and often run it cold; 0W-20 reaches the bearings fastest and resists the fuel dilution and deposit formation that short duty cycles bring
  • Outstanding cold starting
    a pour point of −45 °C and a CCS viscosity of 5900 mPa·s at −35 °C mean reliable lubrication in extreme winter conditions
  • Advanced wear protection
    in operation, the additive package forms a protective barrier on camshafts, cylinder walls and bearings
  • Thermal and oxidative stability
    a viscosity index of 156 keeps viscosity stable throughout the change interval
  • Engine cleanliness
    a TBN of 8.5 mg KOH/g neutralises acidic combustion products and limits sludge, lacquer and deposits
  • Emission system compatibility
    reduced ash, sulphur and phosphorus content protects DPF, GPF and catalytic converters
  • Turbocharger protection
    resistant to thermal breakdown in the hot zone around the turbine bearing

03

What sets MG Red Shift 0W-20 1L apart

Unlike ordinary engine oils, MG Red Shift 0W-20 1L is formulated with an integrated additive package that goes beyond basic lubrication. The active components bond to metal surfaces and create a protective layer that stays effective even over extended oil-change intervals. That means less metal-to-metal contact, lower operating temperatures and quieter engine running – benefits that become more noticeable with every oil change.

A 0W-20 oil has to do two jobs that pull in opposite directions: flow lightly enough to save fuel while still holding a protective film under load. It is the additive chemistry that bridges that gap, which is why this viscosity grade depends far more on the quality of the formulation than thicker oils do.

04

When to use the 1-litre pack

  • Topping up the oil
    between regular service intervals, when the dipstick shows a low level
  • An emergency reserve
    in the boot for longer journeys or unexpected oil consumption
  • Combined with the 4L pack
    for engines with a larger oil capacity (5 litres in total)
  • Topping up where the viscosity grade matters
    modern hybrids and low-viscosity engines must be topped up with exactly the grade the manufacturer specifies, not with whatever is to hand

That last point matters most in this grade. Topping up an engine designed for 0W-20 with a thicker oil increases internal friction and can affect variable valve timing systems that depend on precise oil flow – which makes keeping the right 1-litre pack in the car the safest habit.

05

Technical specifications

  • Product type: Fully synthetic engine oil

  • SAE viscosity: 0W-20

  • API: SP

  • ACEA: C5

  • ILSAC: GF-6A

  • Volume: 1 litre

  • Engine type: Petrol, diesel and hybrid (including turbocharged)

  • Emission system compatibility: DPF, FAP, GPF, TWC

  • Storage: Keep in a cool, dry place, protected from direct sunlight

  • Shelf life: 5 years from the date of manufacture if the pack is unopened

06

Typical values

  • Kinematic viscosity at 100 °C: 8.5 mm²/s

  • Viscosity index: 156

  • Total base number (TBN): 8.5 mg KOH/g

  • Pour point: −45 °C

  • Flash point: 210 °C

  • CCS viscosity at −35 °C: 5900 mPa·s

  • Appearance: Clear, red

07

Performance level / OEM approvals

MG Red Shift 0W-20 1L meets or exceeds the following manufacturer specifications:

  • Mercedes-Benz: MB 229.71

  • GM: dexos1™ Gen 2

  • Jaguar Land Rover: STJLR 51.5122

  • Ford: WSS-M2C947-A

  • Volvo: VCC RBS0-2AE

  • Chrysler: MS 6395

  • Toyota, Nissan, Suzuki: 0W-20 service fill requirements

08

Recommended use

MG Red Shift 0W-20 1L is suitable for petrol, diesel and hybrid engines in passenger cars and light commercial vehicles, including engines with:

  • direct injection (TSI, TFSI, GDI, D-4S, HDI, TDI)

  • a turbocharger

  • Start-Stop systems and full or mild hybrid drives

  • DPF / FAP / GPF particulate filters

  • three-way catalytic converters

Important: use this oil only in engines for which the manufacturer specifies the 0W-20 grade. If the service book calls for a thicker oil, such as 5W-30 or 5W-40, choose the matching product from the MG Red Shift range.

For a full oil change, MG Red Shift 0W-20 is also available in a 4L pack.

09

Why drivers choose MG Red Shift 0W-20 1L

The MG Red Shift range rests on the three pillars shown on the label: Protection, Lubrication, Performance. This 0W-20 adds a fourth dimension – efficiency – for drivers of modern engines whose manufacturers have moved to a low-viscosity service fill to meet emission targets.

The compact 1-litre MG Red Shift 0W-20 pack is a practical choice for drivers who want to protect their engine between service intervals. Whether used on its own for topping up or alongside a larger pack for a full oil change, it offers the same advanced formulation – and the same distinctive clear red colour – in a handy, easy-to-store container.

MG Red Shift 0W-20 1L | MG Red Shift